devimat™ Heating Mats

		Devimat™DSVF150 Series The devimat™ DSVF150 has been designed for installation into screeds/toppings on concrete slabs where floor height is restricted. For installations on concrete floors, 2mm of cover is required over the mat.
Model	Power Rating	Wire Thickness	Self Adhesive	Width	Conductor	Conductor Insulation	Rated
150-DSVF	150 W/m	2.5 mm	yes	50 cm	single	FEP, Teflon	90°C

Installation Information -

Select the INSTALLER INFORMATION tab above or follow the links below

Click for Installation Guide or for Picture Gallery showing typical installations before tiling (or the floor covering is installed)

Floor Insulation Options.

Insulation Board for use beneath Undertile Heating being installed over over wooden, concrete or tiled floors.

Why use an Insulation Board under your Undertile heating Elements? .
because in almost all un-insulated floors fitted with Undertile heating, a substantial portion of the energy produced by the heating elements "disappears" downward into your floor base and which provides no comfort heating for you but still costs you for the lost energy.
Our Floor Insulation board - F-Board6 - is ideally suited to prevent this loss.

Select "more" button at right for information on the benefits of using F-Board6 with your Undertile heating project.

Click for

Links referenced

Installation Guide: http://www.devi.co.nz/index.cfm/3,76,316/dsvf150-install-intructions.pdf
Picture Gallery: http://www.devi.co.nz/index.cfm/1,94,396,-1,html/Devimat-DSVF150-Installation-Picture-Gallery

Location http://www.devi.co.nz/index.cfm/1,76,316,0,html