In Slab Heating

In slab, heating is a heating cable fixed to the top layer of the slab reinforcement before slab pour. Cables are installed with the top mesh in approximately 30-40mm of concrete. The system runs during off-peak hours to cut energy costs and maximise system efficiency. Our heating cables heat the slab, in turn warming the floor covering above.

During peak hours, the system runs on the stored energy accumulated during off-peak hours. The thermal mass the slab provides retains heat for long periods of time, insulating the slab from the outside elements minimises heat loss. This system is usually used in new construction before the slab is poured.